42  ATCO LAWNMOWERS WIDTH OF CUT 50cm (20ʺ) ENGINE Briggs & Stratton 550 Series / 800 Series CAPACITY 127cc / 205cc CUTTING CYLINDER Steel – 6 blades / Steel – 10 blades CUTTING HEIGHT RANGE 7–30mm / 4–27mm CUTTING SPEED @ 3000RPM 76m/min CUTS PER METRE 113 / 188 FRONT ROLLER Steel sectioned / Steel one piece REAR ROLLER Steel split COLLECTOR CAPACITY 62 litres For the finest of lawns you need the finest of mowers and nothing beats the finish achieved by a traditional cylinder mower. There are three outstanding models in this sector of the ATCO range. At the heart of these machines is the cutting cylinder. Our Clipper 16 and Clipper 20 both have cylinders with 6 steel blades which produce almost 113 cuts per metre. With 10 blades, the Clipper 20 Club cylinder achieves 188 cuts per metre and is suitable for light commercial as well as domestic use. All three models are fitted with recoil start Briggs & Stratton 4-stroke engines, have power drive and a centrifugal clutch with variable forward speed controlled by the engine throttle. Cutting heights range from 7mm to 30mm on the Clipper 16 and Clipper 20 and from an amazing 4mm to 27mm on the Clipper 20 Club. A single control point allows infinitely variable adjustment within each range. A manicured lawn really needs classic stripes to show it off to perfection. Steel front and rear rollers fitted to Clipper mowers provide those stripes with no additional effort. ATCO cylinder mowers combine advanced lawn mowing technology, component durability and outstanding performance to deliver a finish truly deserving of our maxim – the finest cut of all. CLIPPER 16 WIDTH OF CUT 40cm (16ʺ) ENGINE Briggs & Stratton 550 Series CAPACITY 127cc CUTTING CYLINDER Steel – 6 blades CUTTING HEIGHT RANGE 7–30mm CUTTING SPEED @ 3000RPM 76m/min CUTS PER METRE 113 FRONT ROLLER Steel sectioned REAR ROLLER Steel split COLLECTOR CAPACITY 51 litres CLIPPER 20 & 20 CLUB 1. MULTI SECTIONAL STEEL FRONT ROLLER 2. LARGE STEEL REAR ROLLER 3. PRECISION CYLINDER CUTTING BLADES 1  2  3